Minelab F3 Manuel de service télécharger pdf (Page 22)

3.4 Test Piece – Functional Test. The F3 is supplied with a

Test Piece specially designed to confirm that the detector is working

to correct specifications. The sensitivity of the detector should be

checked with the Test Piece before, during and after demining

operations, (in compliance with local Standard Operating

Procedures). In some instances, a user may prefer to use inert

mines as test pieces because they represent the local threat.

Minelab recommends that the detector always be first tested with

the supplied Test Piece before local test pieces are used for testing.

NOTE

When switched on, maximum sensitivity is available 30 seconds

after the Threshold Tone commences. Do not test the detector with

the Test Piece until 30 seconds after the Threshold Tone begins.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 48 49

Pas de commentaire

Minelab F3 Manuel de service Page 22