Minelab GPX-4000 Manuel de service télécharger pdf (Page 18)

30 31

The GPX-4000 is provided with a Factory Preset

selection of menu settings, suitable for first-time

users.

Until you become more familiar with the

GPX-4000, the detector can simply be operated with

the Factory Presets and the front panel controls.

To restore all Factory Preset settings:

1 Turn the detector off.

2 Press and hold On/ Off until the Reset Defaults

menu appears (approx. 5-6 seconds).

3 Turn Function Select to the right to select All

Settings, as shown on the diagram.

4 Turn Setting left or right to restore all Factory

Presets.

To restore Factory Preset settings for the

current search mode:

1 Turn the detector off.

2 Press and hold On/ Off until the Reset Defaults

menu appears (approx. 5-6 seconds).

3 Turn Function Select to the right to select the

current mode. The current mode is dependent on

the mode switch on the front panel.

Note: If the

displayed mode is not the one you wish to restore

you must change the mode on the front panel.

4 Turn Setting left or right to restore Factory

Preset settings for that mode.

Function

Select

Setting

On/Off

Hold for FP

Function

Select

Setting

On/Off

Hold for FP

Factory Presets

Main Menu: Range: Factory Preset:

Volume Limit 1 to 40 25

Audio Tone 1 to 100 50

Signal Peak 1 to 20 15

Track Speed Slow

Medium

Fast

Medium

GB Type General

Specific

General

Sensitive Extra

Smooth

Iron Reject Off (All Metal)

1 to 30

Off (All Metal)

Battery Volts - -

Manual Tune 0 to 255 -

Mode Edit: General: Patch: Deep:

Audio Quiet

Normal

Boost

Deep

Normal Boost Deep

Gain 1 to 15 879

Motion Very Slow

Slow

Medium

Fast

Slow Medium Very Slow

Response Normal,

Inverted

Normal Normal Inverted

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 46 47

Commentaires sur ces manuels

Pas de commentaire

Minelab GPX-4000 Manuel de service Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Minelab GPX-4000