Minelab Explorer Spécifications télécharger pdf (Page 37)

70 71

Changes to detector settings

(e.g. Volume, Tone and Sensitivity),

are automatically saved. The detector

remembers these settings when it shuts

down. However, you may find that

different locations require a separate

combination of settings for maximum

effectiveness.

Two people may have different

preferences (e.g. Threshold, Response)

or perhaps you divide your time

between a couple of very different

detecting environments (e.g. the beach

and a highly-mineralized battlefield).

USER SETTINGS - Saving Your

Preferred Settings

MAIN MENU > USER > USER SETTINGS

USER SETTINGS provides you with two

sets of memorized settings, USER A and

USER B. These sets can be used as an

alternative to the factory presets. USER

SETTINGS allows you to load your own

defined settings saving you from having

to ‘set-up’ the detector every time you

turn it on.

To load saved settings:

Press the shift button next to

LOAD  USER A or USER B.

A screen prompt will appear asking

if you want to discard your current

detector settings and load the

memorized settings. Select OK.

Settings will load in approximately

3 seconds.

Restoring Factory Presets will not delete

any saved USER A or B settings.

Restoring factory presets discards all

unsaved adjustments, except the saved

Discrimination Patterns and USER A and

USER B settings.

SETTING RANGE FACTORY

PRESET

USER A USER B

Sensitivity Mode

Semi-Automatic,

Manual

Semi-

Automatic

Sensitivity Value

1 to 32 22

Threshold Volume

0 to 40 16

Discrimination Function

Discrim, Iron Mask Discrim

Iron Mask Value

0 to 31, All Metal 22

Noise Channel*

1 to 11 5 x x

Display Type

Smartfind, Digital Smartfind

Display Size

Normal, Full Screen Normal

Contrast

1 to 10 5

Learn Cursor Size

Small, Medium,

Large

Large

Edit Frame Size

Small, Medium,

Large

Small

Audio Volume Max Limit

0 to 10 10

Audio Volume Gain

1 to 10 8

Audio Threshold Tone

1 to 10 5

Audio Tone Variability

1 to 10 8

Audio Tone Limits

1 to 10 10

Audio Sounds

CONST, CONDUCT,

FERROUS

CONDUCT

Audio Response

NORMAL, LONG,

SMOOTH, PITCH

HOLD

NORMAL

Options Recovery Fast

On, Off Off

Options Recovery Deep

On, Off Off

User Preferences

* Noise Channel is selected automatically

by the

NOISE CANCEL shortcut button or

manually through MAIN MENU > OPTIONS

The Noise Channel cannot

be saved into

USER A or USER B.

Other selections not saved:

Backlight status, Pinpoint.

To save current settings:

Press the shift button next to

SAVE  USER A or USER B.

A screen prompt will appear asking if

you want to save current settings in the

memory. Select OK.

You can now proceed to detect with

these settings, knowing they have

been saved for future use in similar

conditions.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire