Minelab E-Trac Manuel d'instructions télécharger pdf (Page 10)

Power

Pressing turns E-Trac On/O.

Holding for three seconds resets the detector (p. 19)

to the Factory Preset settings, prior to startup.

Left Shift

Pressing in the Edit Screen changes the

Edit Frame Size (pp. 44–5).

Pressing in Combine inverses the selected

Discrimination Pattern (pp. 51–3).

Introducing the Control Panel

Navigation Buttons

Used for adjusting settings in Detect Screens.

Also used in navigating the Menu. (Clockwise from

left: Left, Up, Right, Down.)

Pinpoint

Pressing turns Pinpoint On/O . Pinpoint (p. 33)

assists in locating the exact position of a target prior

to recovery.

Backlight

Press to turn the Backlight On/O. The Backlight

provides greater screen clarity in dim conditions. The

Backlight glows during the startup sequence. Turning

O will extend battery life.

Used to access the Main Menu at any stage of

detector operation. This allows access to various

settings (pp. 34–7).

Accept/Reject

Pressing in the Detection Screens accepts or rejects

the detected target.

Pressing in the Menu takes you back one level.

Noise Cancel

Starts the scan for the quietest operating frequency.

The scan takes 30 seconds (p. 31).

Detect

Pressing, while in the Pattern Screen, will switch the

Detection Screen to Digital Screen, and vice versa if in

Digital. Pressing while in the Main Menu, QuickMask or

Edit Screen, returns to the Pattern/Digital Screen (pp.

23–4) at any stage of operation.

QuickMask

Press to access QuickMask, switching between

QuickMask (p. 32) and Detect screens (p. 22).

Right Shift

Pressing in the Edit Screen changes the

Edit Mode (pp. 44–5).

Pressing in Combine inverses the selected

Discrimination Pattern (pp. 51–3).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 48 49

Commentaires sur ces manuels

Pas de commentaire

Minelab E-Trac Manuel d'instructions Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Minelab E-Trac