Minelab F3 Manuel de service télécharger pdf (Page 8)

F3 INSTRUCTOR NOTES

Minelab Countermine Division Safety Through Excellence

P0616-A

Electronics

Pack

Lock

Lever

Battery

Pack

Upper

Shaft

o Slowly slide the Battery Pack towards the Electronics Pack until

the connector is firmly engaged. Secure the Battery Pack by

rotating the Lock Lever in a clockwise motion into the locked

position.

o If required, the Battery Pack can be separated from the Upper

Shaft thereby reducing the overall weight of the detector. Using

the bayonet connectors at each end of the Extension Cable

connect the cable to the Battery Pack and feed the cable through

the base of the Battery Pack Bag before connecting to the

Electronics Pack. The Battery Pack Bag can then be clipped onto

a belt worn by the operator.

P0653-A

Nine

F3 Preparation

• Extend Middle and Lower Shafts to suit demining Position

Upper

Camlock

Middle

Camlock

Lower

Camlock

P0617-A

o Open the Lower Camlock and rotate the coil to the desired

position. The normal operating position of the coil is in line with the

shaft

. However, the coil can also be positioned at right angles to

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Pas de commentaire

Minelab F3 Manuel de service Page 8