Minelab X-Terra 505 Manuel d'instructions télécharger pdf (Page 86)

My Settings

When people ask what settings I use, I generally tell them that

they should adjust their detector for their site, using the procedure

I’ve outlined in this book. Then I tell them I hunt in All Metal, (zero

discrimination), with Multiple Tones. All Metal allows you to hear every

metallic target the coil passes over. But if I had to pick one specic

setting, I would chose to hunt in a Discrimination Pattern with all the

notches set to accept. I refer to this as zero discrimination because it is a

Discrimination Pattern that is not rejecting any notch segments.

Understanding your X-TERRA - Final Words







Reason one...

Running in a Discrimination Pattern with zero discrimination more

accurately identies deep iron as a ferrous target, compared to the

All Metal. In other words, deep iron gives fewer +48 signals in a zero

Discrimination Pattern than it does in the All Metal. Again, I believe this

reinforces my circular discrimination theory mentioned previously, as

properties assigned to a specic notch segment are the only target

properties you will detect.

I like using zero discrimination in a Pattern for two reasons:

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 95 96

shhshh 23 Jan 2024 | 16:17:44

Minelab X-Terra 505 Manuel d'instructions Page 86