Minelab Safari Manuel d'instructions télécharger pdf (Page 15)

To Turn on Safari:

Press and release the Power button to turn

your detector on/o. On rst time start-up,

your detector will default to the Coin Mode

and you can begin detecting.

Turning the Detector On

When you turn your detector on, the detector

will start with the last setting used in your

previous detecting session.

Quick Start

– Turn on Safari by pressing the

Power button.

– On initial start-up, your detector will default

to the factory Coin Mode.

– To select a dierent factory preset Detect

Mode, press and release the appropriate

Mode button.

– The icon next to the corresponding

preset Detect Mode, indicates that a

factory preset Mode has been selected. The

detector will apply the factory determined

Discrimination Pattern and audio response

for that Mode.

– Press the Noise Cancel button and wait

the 20 seconds it takes to select the most

stable channel.

– Once the Noise Cancel (p. 27) sequence is

completed you can start detecting!

Important: While performing a Noise

Cancel it is important to keep the

detector’s coil motionless, and also ensure

that no metallic objects are moved in close

proximity to the detector’s coil.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Pas de commentaire

Minelab Safari Manuel d'instructions Page 15