Minelab Safari Manuel d'instructions télécharger pdf (Page 30)

Contrast

The contrast of the LCD can be adjusted

using the Contrast control.

Trash Density

The Trash Density control will enable you to

optimise your Safari for detecting in locations

with diering amounts of trash content in

the soil.

High is the factory preset setting, suitable

for most common locations where coins

and relics are found, and also areas with

variable ground mineralisation. The High

setting detects targets at a faster rate, so in

areas with a lot of trash, particularly if close

together, the High setting is more likely to

detect the presence of a “good” target in

amongst a number of rejected or

trash targets.

In High setting, when rejecting certain

targets using the Accept/Reject function,

one or two more target ID segments/

numbers may need to be rejected in order to

fully ignore the target. However, if searching

for a specic target, a much narrower “Accept”

pattern is possible, allowing you to ignore

a greater percentage of unwanted trash or

other targets.

High is the preferred setting when detecting

in heavily mineralised or

variable ground.

By adjusting the Contrast, relative to the

current light conditions, you may make the

information on the LCD easier to see.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Pas de commentaire

Minelab Safari Manuel d'instructions Page 30