Minelab F1A4 Manuel de service télécharger pdf (Page 14)

F1A4 Field Service Manual – Level 1 and Level 2 Maintenance

Page 14

3.2 REPLACING THE HANDLE ASSEMBLY

1. Remove the Control Box, Lower Shaft and Armrest (if fitted) from the Upper

Shaft.

2. Remove the Upper Camlock as described in Section 3.1.

5. Refit the new Upper Camlock as described in Section 3.1.

3. Release the Camlock

Handle and slide the

old Handle off the

shaft.

4. Slide the New Handle

onto the shaft ensuring

correct orientation.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Pas de commentaire

Minelab F1A4 Manuel de service Page 14