Minelab EXPLORER II Manuel de service télécharger pdf (Page 52)

THE MINELAB EXPLORER II

QUICKSTART

www.minelab.com

MODIFYING THE DISPLAY

Figure 5.11 Quickstart’s Main Menu

Full screen display

Figure 5.9, 5.10

If you wish to enlarge the Smartfind or Digital display during

detecting, it is possible to instruct the detector to remove the

display border and other screen elements leaving only the target

details displayed on the full screen.

STEP 1 Press the shift button next to the full screen icon at the

right of the control panel. This will increase the viewing

area from that depicted in Figure 5.9 to that in Figure 5.10.

STEP 2 To return to the original screen, press the same shift

button again (next to the small bar at the edge of screen).

Adjusting the display contrast

Figure 5.11, 5.12

If brighter or more overcast conditions make the detector display

harder to see, it is possible to adjust the display contrast.

STEP 1 Press the MENU shortcut button on the control panel. This

will display the MAIN MENU (Figure 5.11).

STEP 2 Four menu items will be displayed, each with a

turned-down corner. This indicates a following screen.

STEP 3 Press the shift button next to the DISPLAY option. To

denote selection, the box will fill in with solid black and a

new screen with a slider control will appear (Figure 5.12).

STEP 4 Press the shift buttons next to the arrows of the slider

control to change the contrast of the screen display from

the factory setting of 6.

STEP 5 Press the DETECT shortcut button again to continue

detecting.

Figure 5.9 Quickstart’s standard screen

Figure 5.10 Quickstart as full screen display

Figure 5.12 Display menu’s contrast

adjustment screen

MODIFYING THE DISPLAY

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 111 112

Pas de commentaire

Minelab EXPLORER II Manuel de service Page 52