Minelab EXPLORER II Manuel de service télécharger pdf (Page 95)

THE MINELAB EXPLORER II

USER INFO

Make sure that you start with the Main Menu > Audio > Sounds >

CONDUCT selected and the threshold level and the volume are

appropriate for your environment (i.e. for headphones or speaker

use, ambient noise etc.)

STEP 1 Adjust the threshold 'hum' to a tone you are comfortable with

using the Main Menu > Audio > Tone > TH. TONE. This tone

should be the lowest tone you can still hear clearly.

STEP 2 Using two targets you are likely to often seek which

display a difference of 1 or 2 on the digital reading, adjust

Main Menu > Audio > Tone > Variability so you can hear

the difference between one and the other.

STEP 3 Select a target with high conductivity (giving a high

number on the digital display) and wave it past the coil.

Adjust Main Menu > Audio > Tone > Limits for a pitch as high

as possible but still within the range where you can hear well.

If you want the detector to reject targets (for example to make a

new pattern for bottle caps, suitable for your conditions):

STEP 1 Prepare a number of targets from the category you want

to reject (bottle caps).

STEP 2 Go to Advanced Learn and start with an all black screen.

STEP 3 Select Learn Accept (the flashing tick) and pass the coil

over the bottle caps until the detector accepts them.

STEP 4 Go to SAVE (press the shift button next to the SAVE icon)

and save to the location you want (e.g. S4). The Smartfind

thumbnail will display your pattern.

Now that this pattern has been saved, you can use it to construct

your own discrimination pattern by:

• Going to SELECT menu and choosing CLEAR. For instance,

construct this personal discrimination pattern by accepting

coins with a tick and rejecting your newly learnt bottlecaps

pattern (S4) with a cross.

• If you want to improve the pattern, use Advanced Edit to

modify the clear (accepted) area.

HELPFUL HINTS

Setting your own reject

target patterns

Choosing the right Tone

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 111 112

Pas de commentaire

Minelab EXPLORER II Manuel de service Page 95