Minelab EXPLORER II Manuel de service télécharger pdf (Page 78)

THE MINELAB EXPLORER II

ADVANCED USE

www.minelab.com

tutorial

LEARN’S TARGET SELECTION

... continued

Figure 6.5 Adjusting size of learnt region

LEARN’S TARGET SELECTION

Phase 2: Learning and Saving the target pattern

STEP 7 Wave the search coil several times above the desired

target until the detector learns it by clearing an area on

the screen. Learn needs to ‘see’ the target consistently

to accept it for inclusion. If you have more than one

target, repeat the procedure for each one. In Figure 6.5,

two current high denomination coins have been used.

STEP 8 When you have finished learning the targets, press the

shift button next to the flashing tick.

STEP 9 Press the shift button next to the Save icon to go

directly to the SAVE DISCRIM menu. Press a button

next to your choice of option S1–S6 (for example S1 in

Figure 6.6). This will save the learnt discrimination

pattern for future use.

STEP 10 Press the DETECT shortcut button to return to the

detect screen. SELECT DISCRIM will then use this

saved pattern as the current search pattern.

NOTE For more detail on SAVE DISCRIM, turn to page 80.

Figure 6.6 Saving the newly-edited

discrimination pattern

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 111 112

Pas de commentaire

Minelab EXPLORER II Manuel de service Page 78